I just got my Teensy 3.1 and the Audio Addon and soldered them
and added headers. Attached it, so the USB Connector of the
teensy is on the same side as the headphones output.
(The teensy is facing up with the chip to the audio board,
while the audio board is facing up with the chips.
There is no sound coming out of the headphone jack and also the SD card cannot
be initialized.
Also there are 3.3V on the POT 3.3V present. I have also bridged
the POT (middle) pin to 3.3V to see if anything comes out if the volume pot == VDD, but nothing happens.
Any idea?
and added headers. Attached it, so the USB Connector of the
teensy is on the same side as the headphones output.
(The teensy is facing up with the chip to the audio board,
while the audio board is facing up with the chips.
There is no sound coming out of the headphone jack and also the SD card cannot
be initialized.
Also there are 3.3V on the POT 3.3V present. I have also bridged
the POT (middle) pin to 3.3V to see if anything comes out if the volume pot == VDD, but nothing happens.
Any idea?