aleglakov

Try just soldering a wire in place of L2. It's purpose is to prevent high frequency noise just possibly escaping up the USB cable or out the VIN pin. Not really essential for the board to just work. Ideally you should solder a capacitor at...

Put these lines: msg.id = 0x04000001; msg.len = 8; msg.flags.extended = 1; msg.buf[0] = 10; msg.buf[1] = 20; msg.buf[2] = 0; msg.buf[3] = 100; msg.buf[4] = 128; msg.buf[5] = 64; msg.buf[6] = 32; msg.buf[7] = 16; Right before...