KrisKasprzak

@h4yn0nnym0u5e and @jmarsh Full marks! I was able to leverage the code to solve this issue.

not sure why my copy/paste lost the first set of records. Here's the full record set. Address: 0, Record: 0 -...

All, thanks for jumping in. A bit more detail. My chip is the W25Q64JVSSIQ I saw that part about page boundaries. however my write errors are very random. After a full erase and writing 150 records. Oddly I don't get a fail every 256-byte...

Writing to the Windbon flash chip All, I have a library to write to the Teensy approved Windbon chip and to date has been 100% reliable in writing/reading data. I'll estimate I've written some 100 mb and have not lost even 1 bit. My library...

What a great project. The UI is a work of art and the idea is stellar. I was about to do the same for my car--capture performance parameter and GPS and log to an SD card so driving/racing can be played back. I was going to build and sell...

Any chance on giving a synopsis?

All, What is the feasibility of transmitting say 50 bytes of data each second for approx. 90 minutes where the receiver is reading data “nearly real time” meaning a second or so of latency is acceptable? I have a telemetry system for race cars...

OK I'm in the same boat. Initially I had a Teensy 4.1 with 3v3 connected to the 3v3 on the Teensy (before I knew you should not do this). All was fine thought. The cutting the VUSB pad powering via 5v0 in the VIN. Eventually The board could no...