Hello,
I get a lot of noise even with a simple project
first I made my own pcb with smd components so I thought the problem came from there
... so I tested the teensy on a breadboard
I could remove a lot of noise using recommended components
but it still makes more noise than when bypassing the teensy
like, I have to crank the volume half way not to hear the noise anymore while at full volume, I have zero noise bypassing the teensy
- the input is a humbucker guitar pickup
- the output is a marshal MS-2 mini amp
let me know if you need more info, I really need to solve this
have a nice day
I get a lot of noise even with a simple project
Code:
#include <Audio.h>
AudioInputAnalogStereo adcs1;
AudioOutputAnalog dac1;
AudioConnection patchCord1(adcs1, 0, dac1, 0);
void setup() {
AudioMemory(15);
}
void loop() {
}
first I made my own pcb with smd components so I thought the problem came from there
... so I tested the teensy on a breadboard
I could remove a lot of noise using recommended components
but it still makes more noise than when bypassing the teensy
like, I have to crank the volume half way not to hear the noise anymore while at full volume, I have zero noise bypassing the teensy
- the input is a humbucker guitar pickup
- the output is a marshal MS-2 mini amp
let me know if you need more info, I really need to solve this
have a nice day