Radioguy90
New member
I have a question about using the Teensy 2 or 3 in place of the Arduino Uno rev 3. This is not a plug in type question but a functionality question. There is a project shown below that uses the Uno rev 3 see http://m0xpd.blogspot.co.uk/p/occams-microcontroller.html . The Uno is used to control one of the AD9850 DDS boards that come form China or Hong Kong.
The upshot is that I have the code sourced from this site but am looking for a smaller foot print and smaller board to control the AD9850. I have seen some info about how the Teensy can sub for the Arduino – but am not sure about this application. I am also not sure whether I would need the Teensy 2 or 3.
I would also be interfacing an Adafruit I2C to LCD convertor http://www.adafruit.com/products/292
Without a clue?
The upshot is that I have the code sourced from this site but am looking for a smaller foot print and smaller board to control the AD9850. I have seen some info about how the Teensy can sub for the Arduino – but am not sure about this application. I am also not sure whether I would need the Teensy 2 or 3.
I would also be interfacing an Adafruit I2C to LCD convertor http://www.adafruit.com/products/292
Without a clue?