rocessSerialEvents();" is required or a call to yield(); or delay(1); as this code doesn't call yield() [it works when I added it]::
startup.c :: void ResetHandler(void)
{
// ...
while (1) {
//printf("loop\n");
loop();
}#define SERIALX2 Serial2
#define SERIALX3 Serial3
void serialEvent2() {
//SERIALX2.disableSerialEvents();
while (SERIALX2.available()) {
char ch = SERIALX2.read();
Serial.write(ch);
}
}
void serialEvent3() {
// SERIALX3.disableSerialEvents();
while (SERIALX3.available()) {
char ch = SERIALX3.read();
Serial.write(ch);
}
}
elapsedMillis noDelay;
void setup() {
while ( !Serial && millis() < 800 ) ;
pinMode(13, OUTPUT);
SERIALX2.begin(5000000);
SERIALX2.enableSerialEvents();
SERIALX3.begin(5000000);
SERIALX3.enableSerialEvents();
SERIALX2.print( "22222" );
SERIALX3.print( "33333" );
noDelay = 0;
}
void loop() {
// put your main code here, to run repeatedly:
if ( noDelay > 1000 ) {
Serial.print( " ... " );
Serial.println( millis() );
SERIALX2.print( "22222" );
SERIALX3.print( "33333" );
noDelay = 0;
}
[B][U] HardwareSerial::processSerialEvents();[/U][/B]
}
The two functions I put in (analogWriteRes and AnalogReadAveraging - are in the core. Do we need a analogReadFreq?
Remember, reading about using eventresponder for serial way back when in the eventresponder thread. So I agree it is nice!
CORE_PIN5_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
CORE_PIN3_CONFIG = 2; //2:TX_SYNC
CORE_PIN2_CONFIG = 2; //2:TX_DATA0
CORE_PIN33_CONFIG = 2; //2:RX_DATA0
/*
Part of the Wiring project - http://wiring.org.co
Copyright (c) 2004-06 Hernando Barragan
Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General
Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
Boston, MA 02111-1307 USA
*/
#include <stdint.h>
#include <stdlib.h>
void randomSeed(uint32_t newseed)
{
srandom(newseed);
}
uint32_t random(uint32_t howbig)
{
if (howbig == 0) return 0;
return random() % howbig;
}
int32_t random(int32_t howsmall, int32_t howbig)
{
if (howsmall >= howbig) return howsmall;
int32_t diff = howbig - howsmall;
return random(diff) + howsmall;
}
unsigned int makeWord(unsigned int w) { return w; }
unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; }